M0217M10 (120-1:1) Left-hand Gear (without keyway) and M0218M10 (120-1:1) Right-hand Gear (without keyway)
$18.20piece
AEP-19-C1 (left-hand) and AEP-20-C1 (right-hand) are a pair of customized keyless spiral bevel gears for reducers made of 20CrMnTi, with module 1.58, 20° pressure angle and 30 teeth, precision-machined for 1:1 reducer transmission.
Description
This series is a pair of keyless spiral bevel gears for reducers, which are customized products, including left-hand and right-hand versions. The models are AEP-19-C1 (M0217M10 (120-1:1) Left-hand Gear, keyless) and AEP-20-C1 (M0218M10 (120-1:1) Right-hand Gear, keyless). They have opposite directions and the same specifications, specially designed for reducer transmission systems, suitable for installation scenarios without keyway connection, balancing transmission stability and installation convenience.
The two gears have prominent core commonalities: both are made of 20CrMnTi, with excellent structural strength, wear resistance and transmission stability, suitable for conventional transmission conditions of reducers; pressure angle of 20°, module of 1.58, 30 teeth, speed ratio of 1, spiral angle of 35°, inner diameter of 20mm, gear outer diameter of 64.6mm, total length of 17mm, and weight of 0.2095kg each; the processing technology is completely uniform, including sawing, turning, gear milling, heat treatment, shot blasting, boring + end facing + guide arc chamfering, and gear grinding. The keyless structure design does not affect the transmission accuracy, runs stably and reliably, and adapts to the special transmission needs of customized products.
Specific parameter differences and product attributes:
– AEP-19-C1 Left-hand Gear (keyless): Spiral angle 35°/L, a customized product, suitable for the keyless installation scenario where the reducer needs left-hand transmission.
– AEP-20-C1 Right-hand Gear (keyless): Spiral angle 35°/R, a customized product, suitable for the keyless installation scenario where the reducer needs right-hand transmission; both can be used alone to adapt to the corresponding direction, or used in pairs to meet the two-way transmission needs of the reducer.
Additional information
| AEP-19-C1 and AEP-20-C1 weight |
0.2095and0.2095 |
|---|---|
| AEP-19-C1 and AEP-20-C1 Core Components |
gear |
| AEP-19-C1 and AEP-20-C1 Craftsmanship |
Milling |
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
2020802
2020802 Spiral Bevel Gear is a dedicated transmission component for electric tools. Made of 20CrMnTi material, it has a pressure angle of 20°, a module of 1.5, 18 teeth, and a spiral angle of 35°/L, with a shaft diameter of 12mm, an outer diameter of 29.165mm, a total length of 145.5mm, and a single weight of 0.147kg. Produced via multiple correction and precision machining procedures, it features accurate transmission and high stability.
2024413（2024405 )
2024413 (2024405) Spiral Bevel Gear is a dedicated transmission component for electric tools. Made of 20CrMnTi material, it has a pressure angle of 20°, a module of 1.75, 7 teeth, and a spiral angle of 35°/L, with a shaft diameter of 12mm, an outer diameter of 17.1mm, a total length of 41mm, and a single weight of 0.0344kg. Produced via multiple grinding and full inspection procedures, it features high transmission accuracy and low loss.
2024498 Gear
2024498 Spiral Bevel Gear is made of 20CrMo material and manufactured through multiple precision processes including normalizing, gear milling and heat treatment. With a pressure angle of 20°, module of 1.5, 21 teeth and helix angle of 35°/R, it features a compact size (outer diameter of tooth part: 31.4mm, total length: 11.6mm, weight: 0.13kg). Characterized by stable and efficient transmission, it is a high-precision transmission accessory dedicated to power tools.
CJBB002F-1 (5-hole outer diameter non-turned) Finished Product
CJBB002F-1 (5-hole outer diameter non-turned) finished spiral bevel gear features a pressure angle of 20°, module of 1.2118, spiral angle of 35°/L, inner diameter of 5mm, tooth outer diameter of 11.6mm and total length of 19.5mm. It is a dedicated core transmission component for reducers with simplified processes and stable transmission performance.
NBRX-1530 Short-Type – φ8 Gear and NBRX-1530-T24 Long-Type Gear
The NBRX-1530 series of spiral bevel gears (including the short type φ8 and the long type T24) are made of 20CrMo material and manufactured through multiple precision processes. With parameters of 20° pressure angle, 0.9 module and 24 teeth, their helix angles are 35° left-hand rotation and 35° right-hand rotation respectively, and the tooth outer diameter is 21.8mm. The short type has a total length of 10.5mm and a weight of 0.0148kg, while the long type has a total length of 16mm and a weight of 0.0235kg. Specifically designed for sewing equipment, these gears feature stable transmission, wear resistance and durability.
Top Feed Drive Gear
Top Feed Spiral Bevel Drive Gear (exclusive for sewing machinery): 20° pressure angle, 1 module, 26 teeth, 35°/L spiral angle, 7mm inner diameter, 26mm outer tooth diameter, 12.7mm overall length, 0.0294kg weight. Made of 20CrMo via multi-step precision processes, it meets the transmission needs of the top feed mechanism of sewing equipment.
Φ14.73 Left-hand (LH) Straight Teeth and Φ7.94 Right-hand (RH) Straight Teeth
The two models of spur spiral bevel gears (Φ14.73 Left-hand, Φ7.94 Right-hand) are made of 20CrMo material and manufactured through multiple precision processes. With parameters including 20° pressure angle, 0.97 module, 33 teeth and 0° helix angle, both gears have a tooth outer diameter of 32mm. The Φ14.73 model has a total length of 17.65mm and a weight of 0.0487kg, while the Φ7.94 model has a total length of 15.65mm and a weight of 0.0566kg. Specially designed for sewing equipment, these gears are characterized by stable transmission, wear resistance and durability.
Reviews
There are no reviews yet.