M0213M10 (060-1:1) Left-hand Gear (without keyway) and M0214M10 (060-1:1) Right-hand Gear (without keyway)
$10.64piece
A set of keyless spiral bevel gears for reducers made of 20CrMnTi, with module 1.36, 20° pressure angle, 25 teeth and speed ratio 1. AEP-15-C1 is left-hand, AEP-16-C1 is right-hand, with basically the same specifications, precision-machined for reducer keyless transmission scenarios.
描述
This series is a pair of keyless spiral bevel gears for reducers, with models AEP-15-C1 (M0213M10 (060-1:1) Left-hand Gear) and AEP-16-C1 (M0214M10 (060-1:1) Right-hand Gear). They have opposite directions and basically the same specifications, specially designed for reducer transmission systems, suitable for installation scenarios without keyway connection, simplifying the installation process while ensuring stable power transmission.
The two gears have prominent core commonalities: both are made of 20CrMnTi, with excellent strength, wear resistance and transmission stability, suitable for light-load transmission conditions of reducers; pressure angle of 20°, module of 1.36, 25 teeth, speed ratio of 1, spiral angle of 35°, inner diameter of 14mm, gear outer diameter of 34mm, total length of 12.5mm; the processing technology is completely uniform, including sawing, turning, gear milling, heat treatment, shot blasting, boring + end facing + guide arc chamfering, and gear grinding. The keyless design does not affect the transmission accuracy, and the operation is stable and reliable.
Specific minor differences:
– AEP-15-C1 Left-hand Gear (keyless): Spiral angle 35°/L, weight 0.0422kg, suitable for the keyless installation scenario where the reducer needs left-hand transmission.
– AEP-16-C1 Right-hand Gear (keyless): Spiral angle 35°/R, weight 0.042kg, suitable for the keyless installation scenario where the reducer needs right-hand transmission. Used in pairs, they can meet the two-way transmission needs of the reducer; used alone, they can adapt to the installation conditions of the corresponding direction.
其他信息
| AEP-15-C1 and AEP-16-C1 weight |
0.0422and0.042 |
|---|---|
| AEP-15-C1 and AEP-16-C1 Core Components |
gear |
| AEP-15-C1 and AEP-16-C1 Craftsmanship |
Milling |
用户评价 (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
相关产品
2020802
2020802 Spiral Bevel Gear is a dedicated transmission component for electric tools. Made of 20CrMnTi material, it has a pressure angle of 20°, a module of 1.5, 18 teeth, and a spiral angle of 35°/L, with a shaft diameter of 12mm, an outer diameter of 29.165mm, a total length of 145.5mm, and a single weight of 0.147kg. Produced via multiple correction and precision machining procedures, it features accurate transmission and high stability.
32721.150020 Bevel Gear-32721.150010 Bevel Gear
32721 series spiral bevel gears (including 32721.150020/32721.150010) are specially designed for sewing equipment. Made of 20CrMo, they are manufactured through full-process precision processes such as normalizing and turning + full appearance inspection. Core parameters: pressure angle 17°30′, module 1.05, helix angle 40° (right-hand/left-hand rotation respectively); Model 150020: 18 teeth, speed ratio 2, inner diameter 8mm, addendum diameter 21mm, weight 0.0118kg; Model 150010: 36 teeth, inner diameter 15mm, addendum diameter 38.33mm, weight 0.0428kg. Suitable for transmission of sewing equipment, with precise transmission, stability and durability.
50WF1-043 Hook Gear (341 Pinion)and50WF1-040 Lower Shaft (341 Gear Wheel)
BZ-008-C (50WF1-043 Hook Gear/341 Pinion) and BZ-009-C (50WF1-040 Lower Shaft/341 Gear Wheel) are exclusive supporting spiral bevel gears for 341 model sewing equipment. Both are made of 20CrMo and processed through multiple precision processes. Core parameters: pressure angle 20°, module 0.7, helix angle 36.393° (right-hand/left-hand rotation respectively); BZ-008-C: 16 teeth, speed ratio 2, inner diameter 7.94mm, addendum diameter 12mm, weight 0.0617kg; BZ-009-C: 32 teeth, inner diameter 9.5mm, addendum diameter 29.421mm, weight 0.0303kg. Used in supporting pairs, they feature precise and stable transmission, suitable for the transmission needs of sewing equipment.
Bevel Gear 4037014 (Large)
The 4037014 Bevel Gear (Large) is made of 20CrMnTi material and manufactured through multiple precision processes including normalization, turning, gear milling and heat treatment. Its core parameters are 20° pressure angle, 2.12 module, 33 teeth and 35° left-hand rotation, with a tooth outer diameter of 70.442mm, total length of 21.91mm and weight of 0.375kg. Specially designed for reducers, this product features stable transmission, wear resistance and durability.
HL-T19 Right-hand Gear
HL-T19 right-hand spiral bevel gear (exclusive for sewing machinery): 20° pressure angle, 1.3 module, 19 teeth, 35°/R spiral angle, 10mm inner diameter, 25mm shaft diameter, 24.7mm outer tooth diameter, 49.92mm overall length, 0.3003kg weight. Made of 20CrMo via multi-step precision processes, it meets the transmission needs of sewing equipment.
Φ14.73 Left-hand (LH) Straight Teeth and Φ7.94 Right-hand (RH) Straight Teeth
The two models of spur spiral bevel gears (Φ14.73 Left-hand, Φ7.94 Right-hand) are made of 20CrMo material and manufactured through multiple precision processes. With parameters including 20° pressure angle, 0.97 module, 33 teeth and 0° helix angle, both gears have a tooth outer diameter of 32mm. The Φ14.73 model has a total length of 17.65mm and a weight of 0.0487kg, while the Φ7.94 model has a total length of 15.65mm and a weight of 0.0566kg. Specially designed for sewing equipment, these gears are characterized by stable transmission, wear resistance and durability.
评价
目前还没有评价